Call us now ! Send us an email Charlotte Pke nashville United States

Back to Top

5 Maintenance Tips For Your Sliding Glass Door

Sliding Glass Door
When you use your sliding glass door, you expect it to function properly. For the most part, that's what happens. However, sliding glass doors, just like any other part of the house, require some maintenance. Below are five tips to help you keep your glass door in prime working order.

1. Clean the Glass With a Mild Solution and Lint-Free Cloths

Dirt and grime can build up on the patio door glass. Standard dirt shouldn't permanently mark the glass, but sand particles can create minute scratches. You'll want to thoroughly wash your patio door once a season to prevent any buildup.

Use a mild detergent for this task, such as dish soap. Mix the detergent with warm water, and use a sponge to wipe down the door. To dry, use a lint-free cloth. Excess lint won't cause any issues with the surface. However, you'll be able to see it when the sun shines through.

2. Keep the Tracks Clean and Lubricated

The glass isn't the only part of your patio door you need to keep clean. Debris or build-up in the tracks can cause the door to stick when you're trying to move it. Depending on how windy your locale is, you'll need to clean the tracks about once a month to once a season.

To clean the tracks, use the crevice attachment on your vacuum to suction up of the loose debris. Next, use a small, wire brush to scrub the inside of the track. Use the crevice tool again to suction up any debris the brush loosens up. Finish the job by spraying the entire track with a silicone-based lubricant.

3. Adjust the Sliding Rollers

The glass door doesn't simply slide freely within the track. The door frame features a series of rollers at the bottom. Typically, they run smoothly. However, if you clean the tracks yet still notice the door sticking, the issue may be with the rollers.

The first step is to adjust the rollers. Locate the adjusting screw at the bottom of the door end. Using a screwdriver, change the roller height. If the door now runs smoothly, you're finished. If the door still sticks, the rollers may be dirty. You'll have to remove the door from the tracks and clean the rollers using the above method. Finish up with the spray lubricant before replacing the door.

4. Replace Worn Weatherstripping

Weatherstripping, which is often made of rubber, can become cracked over time. Cracked weatherstripping is inefficient. If you see your weatherstripping is deteriorating, replace it.

Replacing the weatherstripping around your sliding glass door can be an involved process, so you may want to hire professionals. If you choose to do it yourself, you'll need to take the door out of its tracks. From there, cut your chosen weatherstripping to length, and use the included adhesive to install it all around the door frame. Gasket-style weatherstripping is the most effective.

5. Get Cracks or Chips Repaired

Sliding glass doors, which are typically made of tempered glass, tend to be pretty durable. That said, an ill-timed knock can create a chip or a crack. Because of the tempered glass, you shouldn't have to worry about the door shattering into shards. However, the chip or crack represents a weakening of the glass.

Typically, small chips and cracks can be repaired, similarly to how you'd have your car's windshield repaired. This job is best left to the professionals to maintain the integrity of the door. Just like with a windshield, if you leave the chip or crack alone, it can become worse. Have the defect repaired as soon as you notice it.

Keep your sliding glass door in good repair with regular maintenance. If you're in need of a new sliding glass door, visit Russell's Glass & Mirror.